Sabo 72-12 HF Manual Del Operador página 56

14
EN
Mechanical transmission
11. Clutch / brake pedal
This pedal has a double function - during the first part of its travel it acts as a clutch,
engaging and disengaging drive to the wheels, and in the second part it acts as a
brake on the rear wheels.
It is important not to take too long in using the clutch as this can cause overheating
and damage the transmission belt.
NOTE
pedal.
12. Speed change
lever
This lever has seven
positions for the 5 for-
ward speeds, the neu-
tral position «N», and
reverse «R». To go from
one speed to another,
press the pedal (11) half
way and move the lever
as per the indications
on the label.
WARNING!
Reverse must only
be engaged when
the machine is
stopped.
Hydrostatic transmission
21. Brake pedal
In hydrostatically driven models this pedal is solely for braking and works on the
rear wheels.
When the machine is in movement, keep your foot off the
COMMANDS AND CONTROL INSTRUMENTS
11
12
N
3 4
2
R
1
5