Maintenance; Safety Recommendations; Access To Mechanical Parts - Sabo 72-12 HF Manual Del Operador

MAINTENANCE

6. MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

WARNING!
nition key and read the relevant instructions. Wear adequate clothing and work
gloves whenever your hands are at risk.
WARNING!
or worn-out parts must always be replaced and not repaired. Only use original
spare parts: The use or non-original and/or incorrectly fitted parts will compro-
mise the safety of the machine, may cause accidents or personal injuries for
which the Manufacturer is under no circumstance liable or responsible.
IMPORTANT
places!
WARNING!
this manual must be carried out by your Dealer or a specialized Service Centre.
Both have the necessary knowledge and equipment to ensure that the work is
done correctly without affecting the safety of the machine.
You must go to a specialised Service Centre or contact your Dealer if the fol-
lowing are malfunctioning:
– the brake;
– the engagement and stop of the blade;
– the drive engagement in forward and in reverse gears.

6.2 ACCESS TO MECHANICAL PARTS

Lift the engine cover (1) to access the engine and me-
chanical parts below it.
To do so:
– put the machine on level ground, bring the cutting
deck into the highest position and put blocks (2) of
around 65 - 70 mm beneath the edge to hold up the
deck during the following stages.
Mechanical transmission
– engage the parking brake;
Before cleaning or doing maintenance work, take out the ig-
Never use the machine with worn or damaged parts. Faulty
Never get rid of used oil, fuel or other pollutants in unauthorised
Any adjustments or maintenance operations not described in
1 3 4
2
29
EN
6
5