Anti-Blocking Function - UNITED OFFICE ULG 350 B1 Instrucciones De Uso

NOTICE
Only after hot lamination: When the finished laminated pouch is
►
ejected from the pouch ejector slot
easily change its shape . For this reason, let the laminated pouch cool for
one minute before touching it .
► To improve the lamination result, you can weigh a still hot laminated pouch
down with a book, a file folder or any other heavy, flat object . This will
give it a smooth and flawless surface .
♦ If you do not wish to start another laminating procedure, move the On/Off
switch
position .
♦ Disconnect the plug from the mains power socket .

Anti-blocking function

At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance .
♦ Turn the anti-blocking switch
be drawn in .
♦ Remove the pouch and turn the anti-blocking switch
pouch thickness .
♦ Re-start the lamination process .
Cleaning
DANGER
Risk of potentially fatal electrical shock!
► Remove the plug from the mains power socket before beginning to clean
the appliance .
► Ensure that moisture cannot permeate into the appliance during cleaning .
IMPORTANT
Possible damage to the appliance
► Do not use aggressive or abrasive cleaners as they may damage the surface
of the housing .
♦ Clean the housing of the appliance only with a lightly moistened cloth and
a mild detergent .
■ 52 │ GB │ MT
to "OFF" and rotate the pouch thickness switch
5
4
of the laminator, it is hot and can
7
to the position ABS . The pouch will no longer
4
to the ABS
4
back to the desired
ULG 350 B1