Tabla de contenido
Publicidad
Operation
Taking a shower
Examples of shower type
combinations:
1
2
3
4
Hydromassage
1
2
3
4
5
32
The system is in „sleep" (OFF)
mode. This is indicated by a
dot flashing in the display.
Switch to „Stand by" mode by
pressing any button. The
display now has background
lighting, the buttons have
dimmed background lighting.
The control unit is ready for
operation.
Example 1:
Overhead and body showers
Example 2:
Hand and body showers
You can now take a shower.
Press the +/- (3) buttons to set
the temperature.
Press the + and >42° (4)
buttons at the same time for
shower temperatures above
42°C.
First activate the body show-
ers (1) and then press the
Hydromassage (2) button.
The body showers now operate
alternately in a certain interval.
Press the MODE (3) button to
change the interval.
The word "PULSE" (4) is shown
on the display, followed by a
number which indicates the
interval in seconds.
Use the +/- (5) buttons to
adjust the interval between 1 to
50 seconds.
One or two shower types can
now be activated by pressing
one or two buttons. The respec-
tive buttons have bright back-
ground lighting. Dark buttons
cannot be selected. Pressing an
active button resets this button
and a different shower type
can then be selected.
Varying temperatures during
hydromassage improve the
stimulation effect on your
circulation.
Publicidad
Tabla de contenido
