5) At the top edge of the back support, fasten the hook-and-loop closure on the padding (see fig. 27, item 1).
6) Adjust the length on the belt closures. Do so by loosening the belt ends in the buckles, adjusting the length
and pulling them tight.
26
Installing and adjusting the lap belt
1) Thread the lap belt of the five-point belt in front of the back support upholstery through the two eyebolts at the
lower end of the back support (see fig. 28).
2) Adjust the length of the lap belt at the buckle.
Installing and adjusting the centre belt
1) Attach the centre belt of the five-point belt to the loop on the seat surface (see fig. 29).
2) Adjust the length of the centre belt using the triglide.
INFORMATION: The centre belt and lap belt must not be removed before folding up the rehab folding
buggy.
28
Using the five-point belt
1) To open the belt, press the release button and undo the buckle (see fig. 30).
2) Seat the user in the seat.
3) Bring all of the belts together in the buckle. The buckle can only be closed if the strap tabs are inserted in the
correct order (see fig. 30).
Lisa
27
29
Use
55