Package Contents; Technical Specifications; Safety Information - Crivit 291082 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following operating
instructions.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.

Package contents

1 x Kids' Ice Skates
1 x Instructions for use

Technical Specifications

Sizes: 32 - 36
DIN EN 15638:2009
Max. weight: 100kg
Date of manufacture (month/year):
08/2017
Intended Use
This item has been manufactured as a casual ice
skate for private use and is not suitable for ice
hockey competitions or figure skating.

Safety information

WARNING!
Skating on open waters poses a risk
of drowning. Make certain that the ice
holds!
Risk of Injury!
• Check that all screws and nuts are securely
attached before each use. The item may only
be used if it is in perfect condition.
• Do not modify the item in such a way as to
endanger your safety in any circumstances.
• For your own safety, always wear
appropriate personal protective equipment
(helmet, hand, wrist, elbow, and knee pads).
• Always wear reflective clothing to increase
your visibility.
• Risk of cuts! When handling the skates,
always be aware that the blades are sharp!
• Do not use the item with bare feet.
Attaching and removing
Preparing to attach skates from
delivery condition
IMPORTANT!
Ensure your ice skates fit correctly.
The outer boot should not deform when
buckling the clasps. Do not forcefully
buckle the clasps. If your outer boot
is deformed, that is a sign of incorrect
tension or you have possibly purchased
the item in an incorrect size.
Attaching:
• Pull on the ice skates with the help of the
slip-on aiding straps (1).
• Tighten the laces (2) with the fixing clip (3).
Important: Ensure that the loose laces
do not hang out of the shoe, other
wise you could trip over them.
• Close the Velcro strap (7).
• Slide the ratchet band (5) into the
designated hole under the latch (6) and
adjust it to the proper tension.
Note:
By pressing the latch down, you can
move the ratchet band back and forth
until you have found the proper tension
for your foot (Fig. C).
• Next, close the safety clasp (4) ("CLICK").
Removing:
• Open the safety clasp by simultaneously
pressing both buttons (4a) (Fig. B).
• Press the latch and pull out the ratchet band.
• Open the Velcro strap.
• Push the button (3a) on the fixing clip in the
direction of the arrow in order to loosen the
laces (Fig. D).
Adjusting the size
Press down the adjusting button (10) and shift
the shoe to the desired size. This must lock
through an audible CLICK.
The arrow on the show (8) shows the
appropriate size on the frame (Fig. E).
GB/IE
9

Publicidad

Tabla de contenido
loading

Tabla de contenido