Vaillant VPV I Serie Instrucciones De Funcionamiento página 12

Appendix
Setting level
Self-test ¹
Gener. ch. curve
Event log
Information
Main menu → Yield →
Daily yield
Monthly yield
Annual yield
Total yield
Main menu → Remuneration →
Daily remuneration
Monthly remuneration
Annual remuneration
Total remuneration
Main menu → Settings →
Time/date
Remuneration ¹
PV input configuration
Energy management
¹ This menu item is not always displayed. Whether or not it is present depends on the unit type, the settings on the inverter, and the
firmware version.
² This menu item is always displayed. It is not possible to switch it off.
³ Can be reset to 0 via Main menu → Settings → Clear event log.
10
Values
Unit Increment, select, explanation
Min. Max.
– –
Carries out a self-test.
Press and hold
Possible displays:
–
–
–
–
–
–
–
–
–
– –
Displays the PV generator characteristic as a
diagram.
– –
Displays the event messages in chronological
order.
– –
Displays the Information sub-menu.
Current value kWh Individual yields for the yield period
→ Select the individual yield and press
display it as a diagram.
Current value kWh Individual yields for the yield period
→ Select the individual yield and press
display it as a diagram.
Current value kWh Individual yields for the yield period
→ Select the individual yield and press
display it as a diagram.
Current value kWh Total yield since the start of the recording
Current value €, £, kr, Individual yields for the yield period
none
→ Select the individual yield and press
display it as a diagram.
Current value €, £, kr, Individual yields for the yield period
none
→ Select the individual yield and press
display it as a diagram.
Current value €, £, kr, Individual yields for the yield period
none
→ Select the individual yield and press
display it as a diagram.
Current value €, £, kr, Total yield since the start of the recording
none
– –
Displays the Time/date sub-menu.
– –
Selecting the compensation factor/currency
– –
Enables PV generators that have a higher input
current than that stated on the data plate to be
connected.
– –
Displays the Energy management sub-menu.
for one second to confirm.
Not enough sunlight
Invalid grid conditions
MSD not ready
No country set
An error was detected
Self test passed
Self test failed
Self test running
Self test not performed
Operating instructions VPV I 0020273427_02
Factory set-
ting
–
–
–
–
–
to
–
to
–
to
–
–
to
–
to
–
to
–
–
–
–
–