Appendix
Setting level
Consumption
Main menu → Settings → Network →
DHCP
IP address
Subnet mask
Gateway
DNS
Web portal
Discovery Service
Main menu → Settings → Network → Web portal →
Setup
Retransmission
Connection test
Main menu → Information →
Contact info
¹ This menu item is not always displayed. Whether or not it is present depends on the unit type, the settings on the inverter, and the
firmware version.
² This menu item is always displayed. It is not possible to switch it off.
³ Can be reset to 0 via Main menu → Settings → Clear event log.
14
Values
Unit
Increment, select, explanation
Min.
Max.
–
–
As required in certain countries (e.g. Spain),
not all power has to be fed into the AC network
(100% own consumption). The inverter ensures
that AC power is not fed into the network de-
pending on whether the energy meter has been
installed in the feed-in path or in the consumption
path.
The actual limit can be reached by setting the
"Dyn. feed-in control" set value to 0. The Modbus
energy meter is required to do this.
–
–
Automatic integration into an existing network
Selection options:
–
–
–
–
IP address for the inverter
–
–
Subnet mask for the inverter
–
–
IP address for the network gateway
–
–
IP address for the DNS server
–
–
Displays the Web portal sub-menu.
–
–
Selection options:
–
–
–
–
Selection options:
–
–
–
–
For further options, ask customer service.
–
–
Transfer data that is available in the inverter
again.
Duration about 2 minutes Proceed?
Press and hold
→ Retransmission successful
or
→ Retransmission failed
–
–
Checks the Internet connection and displays res-
ults for the following points:
–
→ Connected
or
→ Target host not reachable
–
–
–
–
–
Contact details as a QR code
On
Off
On
Off
Meteocontrol
SolarWorld
Solar Frontier
PIKO Solar Portal
for one second to confirm.
Internet status:
Target address:
Host name:
Port:
Operating instructions VPV I 0020273427_02
Factory set-
ting
Feed-in
On
–
–
–
–
–
On
–
–
Target
address:
23.102.16.32
Host name:
vaillant.
readingnodes.
powerdoo.com
Port: 8383
–