Menu Button - ECG PCB 815 Manual De Instrucciones

DESCRIPTION
A Bread make parts
1. Observation window
2. Lid
3. Two kneading paddles
B Control panel
START/STOP button
• Press START/STOP to start a program. The indicator lights up and the colon starts flashing. After starting a program
all other buttons except for START/ STOP/PAUSE are inactive.
Press the button START/STOP for half a second to enter the pause mode. If you do not perform any action within
•
3 minutes, the program resumes and will continue until it is completed.
When you press the button START/STOP for three seconds, you cancel an active program. When the program
•
stops it is indicated by a beep. This function (turning off by long press) is there to prevent accidental cancelling of
the program.
GB
If you want to remove the bread, press START/STOP to end the baking process.
•

MENU button

• Press MENU to select the required program. Each time you press a button (accompanied by a beep) you switch to
the next program. The display shows the numbers of different programs in succession.
COLOR button
• Press COLOR to select the required browning setting: LIGHT (light), MEDIUM (medium), DARK (dark) or RAPID
(rapid). The button can be used in programs 1–8 and 14–15.
LOAF SIZE button
• Use this button to select the gross weight of the loaf (1125 g, 1350 g, 1600 g). You can use this button in modes 1–7.
TIMER +/- buttons
You can use timer to postpone baking to a later time. Press (+) and (-) to delay the process by up to 15 hours. The
•
set time will appear on the display. The minimal delay time depends on the chosen program.
Notes:
• Set the timer only after selection of the program (MENU), weight (LOAF SIZE) and browning (COLOR).
• Do not use timer with recipes using eggs and milk products (milk, cream, cheese...).
Press (+) (-) to select when the bread should be ready. Keep in mind that you have to add to the the delay
•
time the length of the program. After completing the program the appliance switches for 1 hour to keep warm
mode. Before you start baking bread, using the buttons MENU and COLOR select a program and the degree
of browning and then press (+) or (-) to extend or shorten the start of delay period (one step is 10 minutes).
Maximum timer delay is 15 hours.
HOME MADE button
Use this button to customize the program to suit your needs, see the description of individual programs.
OPERATING INSTRUCTIONS
STARTING
Before first use
• Read all instructions and important information.
• Remove all packaging, including labels and stickers and wipe the surface with a damp dishwashing cloth. Make sure
that all the parts were supplied in good condition.
52
52
4. Removable baking pan
5. Control panel B
6. Body of the bread maker
7. Measuring cup
8. Spoon
9. Hook