Changing Settings Using Switches; Built In Switches - Blackmagic Design MultiView Serie Manual De Instalación Y Funcionamiento

Changing Settings using Switches

On Blackmagic MultiView 4 and MultiView 4 HD, there are small built in switches to let you
change settings. On the Blackmagic MultiView 4, the switches are on the front panel, behind
a rubber dust cap.
On Blackmagic MultiView 4 HD, the switches are on the side of the unit.
Blackmagic
MultiView 4
Change settings by adjusting the switches with a pen
On Blackmagic MultiView 4 HD, the small switches
are located on the rear side panel

Built in Switches

You'll find a switch settings diagram printed on the base of the unit. Ensure your switch settings
correspond to the legend by observing the switch numbers from 8 to 1, left to right.
TIP Even though switch settings are printed on the base of the unit, new features in
later updates can add new settings so it's worth checking the latest version of this
manual for the most up to date information. You can download the latest version from
the Blackmagic Design support center at www.blackmagicdesign.com/support
1 2 3
SD/HD/3G/6G-SDI IN
ETHERNET
HD
UHD
OUT
4
HDMI OUT
Changing Settings using Switches 19