Using Videohub Control Software - Blackmagic Design MultiView Serie Manual De Instalación Y Funcionamiento

Using Videohub Control Software

When you have Blackmagic MultiView 16 connected to a network, you can use Blackmagic
Videohub Control on a Mac or Windows computer to route Blackmagic MultiView 16's
video inputs to different views within your multi view layout. Your Blackmagic MultiView's
SDI inputs appear as pushbuttons within the 'sources' panel, while the views appear as
pushbuttons within the 'destinations' panel. The Videohub Control application is part of the
Videohub software installer which can be downloaded from the Blackmagic Design support
center at www.blackmagicdesign.com/support.
NOTE You can use Videohub Control software to route sources to views
on Blackmagic MultiView 16, plus other settings such as selecting the view for
solo mode, or the audio source for the multi view output. On Blackmagic MultiView 4,
you can use Videohub Control software to change the solo source and audio source
for the multi view output.
Select your MultiView 16
After launching the Videohub Control software, click on the gear icon to open the 'settings' pop
up menu, and choose "select Videohub". Select your Blackmagic MultiView 16's name from the
list of connected devices.
If your inputs are labelled, the names you assigned will appear within the Videohub Control
software. If they are not labelled they will display as Input 1, Input 2, Input 3, etc.
You can use Blackmagic Videohub Control to route
Blackmagic MultiView 16's sources to different views
Using Videohub Control Software 33