Blackmagic Design MultiView Serie Manual De Instalación Y Funcionamiento página 28

Changing the Multi View Layout
Similar to the 'layout' settings on Blackmagic MultiView 16's control panel LCD menu, you can
also change the layout using the setup software. Choose the layout setting you wish to use by
clicking on the desired layout icon in the 'details' settings.
Set the screen layout for MultiView 16 in the 'video output' tab.
Tally Configuration
On Blackmagic MultiView 4 HD, you can set the tally configuration to tally override, or flag as
sent by a Blackmagic camera, or by camera number when sent from the ATEM switcher to input
4 of the MultiView 4 HD.
Tally options on the 'Tally' menu of the MultiView setup utility.
When selecting tally to correspond to the switcher input you can enter the camera number from
1 to 99 into the text field for inputs 1 to 4.
Tally Override
Tally signals are generally provided by the program return feed connected to the last SDI input
on your MultiView. However, there may be times when you want to have all your cameras
connected to all the views.
If you are using Blackmagic Design cameras connected to an ATEM switcher, or to another SDI
switcher with a third party tally system, you can enable tally override. With tally override
selected, your MultiView 4 HD will now look for tally signals embedded in each SDI input signal.
This means all views receive their tally signal independently, rather than a collective tally signal
via the program return on the unit's last input.
Using Blackmagic MultiView Setup 28