Safety Regulations - Corghi BRC1T-BR300 Manual De Uso

WARNING
Failure to observe these instructions and the relative danger warnings can cause seri-
ous injury to the operator and others. Do not power up the machine before you have
read and understood all the danger/warning/attention notices in this manual.
This machine must be used only by qualified and authorised personnel. A qualified operator
is construed as a person who has read and understood the manufacturer's instructions, is
suitably trained, and is conversant with safety and adjustment procedures to be adhered
to during operations. Operators are expressly forbidden from using the machine under
the influence of alcohol or drugs capable of affecting physical and mental capacity.
The following conditions are essential:
- the operator must be able to read and understand the contents of this manual;
- make sure the operator has a thorough knowledge of the capabilities and characteristics
of this machine.
- Keep unauthorised persons well clear of the area of operations.
- Check that machine installation complies with all currently effective regulations and
standards.
- Make sure that all machine operators are suitable trained, that they are capable of using
the machine correctly and that they are adequately supervised during their work.
- Never leave nuts, bolts, tools or anything else on the machine which could get caught
up in moving parts while the machine is in operation.
- Never touch electrical devices, lines or motors without checking that the plug has been
removed from the power socket.
- read this manual carefully and learn how to use the machine correctly and safely;
- always keep this user manual in a place where it can be readily consulted when working
with the machine and consult it whenever you are in need of confirmation or explana-
tions.
WARNING
Do not remove or cover up any of the WARNING, CAUTION or INSTRUCTION decals.
Replace any decal which is not legible or which has fallen off. If one or more of these
decals has been detached or damaged, request them from your closest dealer.
- When operating or servicing the machine, always be sure to follow all industrial accident
prevention regulations covering high voltage equipment.
- Any unauthorised alterations made to the machine automatically release the manufacturer
from any liability in the case of damage or incidents attributable to such alterations.
Specifically, tampering with or removing the machine's safety devices is a breach of the
regulations for industrial accident prevention.
CAUTION
During all operating and servicing procedures, long hair should be restrained. Do not
wear large or flapping clothes, ties, necklaces, rings or wristwatches which could be
caught up in the machine's moving parts.
30

SAFETY REGULATIONS

User manual BR