Num'axes CANICALM Manual De Instrucciones página 13

To fill the reservoir:
– Put the unit on a flat and stable surface with the refill valve upright and the spray valve directed away
from your body and your eyes (See Diagram 2).
– Hold the spray can upside down then insert the nozzle in the refill valve.
– Firmly push down on the spray can and hold for 3 seconds, then release.
If spray is escaping while you are filling the reservoir, you are not pressing firmly enough and/or you
are not holding the can in a vertical position (See Diagram 2).
– Wait for a short time, then turn your collar on by pressing on the red on/off button in order to trigger
a spray (see Diagram 3).
– Repeat this procedure 2 or 3 times in order to ensure the good operation of the collar.
– In order to fill completely the resevoir, check in the first place that the collar is turned off.
– Turn the spray can upside down and insert the nozzle in the refill valve (spray refill in a vertical
position).
– Firmly push down on the spray can for 10 seconds then release.
There are about 25 sprays in each reservoir.
It is very important to refill the reservoir before the
spray reservoir runs dry. Otherwise, your dog
understands that he/she can stop the sprays by
barking during a certain amount of time and
associates barking with reward.
The spraying valve and microphone have
to be directed away from your body
(especially from your eyes).
Spraying valve
Microphone
13
Gb - 13
Diagram 2
Hold the spray refill upside
down and in a vertical position
Refill valve