2. SPECIFICATION
a. Monitor
1. Answering handset.
2. Control screen on which the visitor's face appears (diagonal 10 cm – black & white).
3. Key to set the time, the day, the month and the year.
4. Key to change the time and to scroll the recorded images.
5. Key automatic record mode (the indicator "6" should light up).
6. Indicator, record mode activated.
7. Key for recording the image displayed on the screen.
8. Selection of the ring tone (4 selectable melodies) to use with the key "9".
9. Resuming the picture (indicator "11" lights in red), a second pulse commutes a second entrance,
usable with the WEVPPL 461 E BIS option (indicator "11" lights in green).
10. Ring tone switch off, indicator "12" lights in red (the image will be displayed without ring tone).
11. Selection indicator of the roadside panel (lights in red for the roadside panel connected on C-
&C+ or lights in green for the roadside panel connected on S- &S+).
12. Indicator "ring tone switched off" lights in red if the ring tone is switched off.
13. Control key of an automatic gate opener (the automatic gate opener connects directly to the
roadside panel).
14. Control key for electrical strike or lock (the strike or lock connects directly to the roadside
panel).
15. "outlet" for connecting the RJ plug of the handset.
16. Cursor, on the left side of the monitor, for setting the ring tone volume.
17. Potentiometer on the left side of the monitor for setting the brightness.
18. Speaker for the ring tone.
3EN