Roadside Panel; Connecting The Video Door Phone - Extel WEVP 461 E BIS Instrucciones De Uso

b. Roadside panel
1. Auto focus C-MOS camera lens.
2. Infrared lighting (non visible): enables seeing the visitor even in a low light environment.
(visitor at a distance lower than 30 cm. Beyond this distance, use an additional lighting).
3. Speaker: enables to be heard outside.
4. Label holder and call button: when you press this button, the ring tone is heard inside and out-
side, the monitor and the roadside panel camera switch on (light only after one call).
5. Microphone: enables the visitor to communicate with the internal unit.
6. Cursor for the inclination of the camera (slide it upwards or downwards).

3. CONNECTING THE VIDEO DOOR PHONE

a. Connecting the video door phone
To avoid disturbance and malfunction risks, do not put the video door phone cable in the same
sheath as electric cables.
1. Carefully connect the devices according to wiring diagram.
2. Only 2 wires are necessary for all the functions:
ring tone, image, sound, control of an automatic gate opener and control of an electrical strike
or lock.
Carefully observe the numbers of the wires between the monitor and the roadside panel
(no polarity to observe for the door-opener control)
4EN