Using The Video Door Phone - Extel WEVP 461 E BIS Instrucciones De Uso

5. USE
a. Settings
2 settings are accessible from the side of the monitor:
• up - Brightness adjustment
• down - Ring tone volume adjustment.
You can select 4 ring tones:
When setting the volume of the ring tone, do not hold the handset to your ear because the
volume of the handset is high.
• Press the key
• To scroll the ring tones press the key
• To fix the selected ring tone, press again the key
• You can "switch off" the ring tone with the key
b. Using the video door phone
• Remove the protective film from the screen and the roadside panel lens.
• By pressing the roadside panel call button the ring tone is heard on the monitor until the
handset is picked up or the end of the time delay of approx. 40 seconds.
• The screen lights up and the face of the visitor is displayed (indicator lights in red if the call
comes from main roadside panel or indicator lights in green if the call comes from the optional
second roadside panel).
• Once the visitor is identified, pick up the handset to communicate with him.
• Once the conversation is over, you can control the gate opener and hang up the handset.
It is normal that the image switches off one moment following the control of the gate opener
Reminder
For security reason the opening controls
• To resume the image approx. for 30 seconds, press the key
up or hung up.
At any time during a conversation or a monitoring you can record the image on the screen by
pressing the key .
to enter the "select ring tone" mode.
.
.
.
can only be used if the screen is switched on.
10EN
, whether the handset is picked