Appendix B: Command List - Promax MO-180 Manual De Usuario

Here follows a table with all available commands.
Name Message
NAM
*?NAM<cr>⇒
VER
*?VER<cr>⇒
BEP *BEP<cr>
*USRtext<cr>
USR
*?USR<cr>
STO *STOnn<cr>
RCL *RCLnn<cr>
*FRQnn...n<cr>
FRQ
*?FRQ<cr>
*ATTnn<cr>
ATT
*?ATT<cr>
*?ERN<cr>
ERN
ERC *ERC<cr>
*?ERLnn<cr>
ERL
*?LCK<cr>
LCK
04/2008

APPENDIX B: Command List

Answer
⇐*NAMMO-
180<cr>
⇐*VERv0.7.10<c
r>
*USRtext<cr>
*FRQnn...n<cr>
*ATTnn<cr>
*ERNnn...n<cr>
*ERLtext<cr>
* LCKchhhh
<cr>
USER'S MANUAL. MO-180
Description and Format
Retrieve equipment model
Retrieve SW version.
Acoustic indication
Set a new USER text to be
displayed in the LCD panel.
'text' is an ASCII text with a
maximum of 32 characters
Returns the current USER text
Save the current configuration to a
memory.
´nn´ is a decimal value from 00 to 10
Retrieve a configuration from a
memory.
´nn´ is a decimal value from 00 to 10
Modify the equipment RF frequency.
´nn...n´ is the frequency value in
Hz, expressed with 9 digits, from
45 to 875 MHz
Returns the current RF frequency in
Hz and with 9 digits (padding with '0'
on the left).
Change the RF output attenuation.
'nn' is the new decimal attenuation
value in dB
Returns the current RF attenuation
value.
'nn' value using 2 decimal digits
(padding with '0' on the left)
Retrieve the internal error counter.
'nn...n' value using 8 decimal digits
(padding with '0' on the left)
Clear the internal error counter.
Retrieve an error message
'nn' is the error index in decimal
value 'text' is the text string in ASCII
format
Retrieve the locked status.
'c' is the lock test result: 'L for
locked, 'U' for unlocked
'hhhh' is an hexadecimal value
corresponding to a status code (see
section 4.11 for error codes)
Page 76