Rear Panel Description - Promax MO-180 Manual De Usuario

When the rotary encoder is pressed, and we are modifying any equipment
function, the option currently being shown on the LCD panel is selected. Turning
the encoder clockwise or counter clockwise allows us to navigate through each
menu function and option available in the MO-180.

4.2 Rear panel description

The rear panel shows, from right to left, the mains socket for AC voltage input,
the fan air outlet, an RJ-45 connector for remote control via Ethernet, a parallel DVB-
SPI TS input, one 10 MHz GPS loop-through output, one 10 MHz GPS input, one GPS
1pps input, two DVB-ASI TS inputs, an IF (nominally 36 MHz) output and the main RF
output, at the frequency and level chosen by the user.
6 7 8 9
[6] RF output, 50 Ω, female N-type connector.
[7] IF output, 50 Ω, female BNC.
[8] ASI1 input, 75 Ω, female BNC.
DVB-ASI input number 1.
[9] ASI2 input, 75 Ω, female BNC.
DVB-ASI input number 2.
[10] 1PPS GPS input, 50 Ω or high impedance, female BNC.
[11] 10 MHz GPS input, 50 Ω or high impedance, female BNC.
[12] 10 MHz GPS output, female BNC.
[13] Parallel TS input, DB-25
DVB-SPI input.
[14] ETHERNET connector.
[15] AC voltage connector
Supplies power to the equipment.
[16] Mains switch
Switch on or off the power supply.
Page 16
13 14
Figure 2.- Rear panel view.
USER'S MANUAL MO-180
15 16
04/2008