Auto And Sleep; Auto Mode; Sleep Mode - Winix HR1000 Manual De Instrucciones

Operation |

AUTO AND SLEEP

Every time the Mode button is pressed, the Mode LED light will cycle through the
settings.
(Auto, Sleep, Low, Medium, High, Turbo)

1. Auto Mode

Enables Auto operation based on the unit's air quality Smart Sensors.
Press the Mode button to select Auto mode.
①
x The mode LED light will indicate when 'Auto' mode has been selected, and
operation will begin.
x Each time the Mode button is pressed, the modes will be cycled.
(
Auto, Sleep, Low, Medium, High, Turbo)
▶ When in Auto Mode the fan speed is automatically adjusted
▶ When unit is first started, Auto Mode is enabled and set to Low

2. Sleep Mode

Press the Mode button to select Sleep
①
mode.
x The mode LED light will indicate when 'Sleep'
mode has been selected, and operation in
that mode will begin.
▶ When Sleep mode is selected, the fan
▶ When Sleep Mode is enabled, the Air
English
Operating the air cleaner
according to the indoor air quality. As the indoor air quality
improves, the fan speed will automatically be reduced. If the
indoor air quality decreases the fan speed will automatically be
increased.
fan speed.
speed is automatically set to Low. Fan
speed can be changed by pressing the
Fan Speed (Mode) Button.
Quality light is disabled.
.
▶
10
HR 1000