Contracture Footrest - Ki Mobility Little Wave FLIP XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
M. Contracture Footrest
1. Changing Footrest and Footplate Angle
NOTE: Contracture Footrest is shown in the outside mount configuration. An inside mount can
be achieved by moving the leg rests to the opposite side.
a. The footrests on a contracture footrest can be angled toward the chair and away from the
chair by simply adjusting to upper pivot point (Fig. 26:A).
b. The footplates on a contracture footrest can also be moved front to rear (Fig. 26:B), are
angle adjustable (Fig. 26:C) and can be flipped up for transfer (Fig. 26:D).
Fig. 26
B (Rear Position)
2. Changing Footrest Height
a. Remove screw (Fig. 27:B) and nut (Fig. 27:C) from the long pivot (Fig. 27:A) and slide exten-
sion tube to desired height. See Chart in Fig. 27 for footrest heights that correspond with
each hole.
Fig. 27
A
B
A
Footrest
Height
C
28
B (Front
Position)
C
Extension Tube
Short
14.5"
14.0"
13.5"
13.0"
12.5"
12.0"
11.5"
11.0"
10.5"
D
Medium Long
17.5" 20.5"
17.0" 20.0"
16.5" 19.5"
16.0" 19.0"
15.5" 18.5"
15.0" 18.0"
14.5" 17.5"
14.0" 17.0"
13.5" 16.5"