SICE S 200 Manual De Instrucciones página 141

correspond could explode and cause accidents.
3. Never exceed the tyre setting pressure (gauge on hose) provided by the manufacturer.
4. Never place your head or any part of your body over a tyre during inflation process or
when attempting to seat beads. This machine is not a safety device against the possible
risk of explosion of tyres, tubes or rims.
5. Always keep a safe distance from the tyre changer when inflating, do not approach it.
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufficient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly to the rim dimensions (printed inside the rim) or if the rim or the tyre is
defective or damaged.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep all persons not working on the machine out of the working area.
Tyre bead insertion through GT (optional)
If while inflating the tyre is not positioned correctly
on the rim due to excessive space between the tyre
and the rim, a jet of pressurised air can be used with
the jaw of the turntable.
Verify that both upper and lower tyre beads and rim
bead seat have been properly lubricated with an
approved assembly paste.
Make sure that the tyre is completely sealed on the
rim in the lower part of the wheel.
Remove valve rod core if it has not already been
removed.
Connect inflation hose to valve rod.
Grip the jet inflation device with both hands and position it on the upper rim edge in
order to push the valve located on the end of the nozzle towards the rim.
Manuale d'uso S 200
DANGER
141