Maintenance And Spare Parts - SICE S 200 Manual De Instrucciones

Maintenance
programme
Weekly
Periodically

4.2 Maintenance and Spare Parts

Assembly Paste
Mounting/demounting Protector Kit consisting of:
10 demounting protectors
5 mounting protectors
15 protector screws
154
Carry out the following maintenance
Clean tyre changer with shop towels or a vacuum cleaner.
Do not clean with or use compressed air, which can blast
dirt between moving parts.
Do not use cleaning solvents to clean pressure regulator/
oiler.
Refill the pressure regulator/oiler using only Hunter Lubri-
Oil, 148-133-2, as needed. Petroleum-based oils should
never be used in the oiler and may void all warranties.
Adjust the oiler to release one drop of oil every three
rotations of the clamping table by adjusting the screw on
top.
Check for loose bolts and tighten according to
specifications.
NAME NUMBER
3-00708
8-11400325
Manuale d'uso S 200