Four Wheel Drive (4Wd) System (If Equipped); 4Wd System Indicator Lights - Ford Escape 2005 Guia Del Propietario

4. Turn the ignition to position 1
(LOCK) to shut the engine off and
remove the ignition key.
Do not park your vehicle in Neutral, it may move unexpectedly
and injure someone. Use 1 (First) gear and set the parking brake
fully.

FOUR WHEEL DRIVE (4WD) SYSTEM (IF EQUIPPED)

For important information regarding safe operation of this type
of vehicle, see Preparing to drive your vehicle in this chapter.
Your vehicle is equipped with an intelligent 4WD System that
continuously monitors vehicle conditions and automatically adjusts the
power distribution between the front and rear wheels. It combines
transparent all-surface operation with highly capable four-wheel drive.
The 4WD system is always active and requires no driver input. It is
capable of handling all road conditions, including street and highway
driving as well as off-road and winter driving.
During very extreme off-road events, the 4WD system has a heat
protection mode to protect itself from damage. If the system detects an
overheat condition, it will enter a locked mode. If the heat in the 4WD
system continues to rise in locked mode, it will disable itself. To exit heat
protection mode, simply stop the vehicle and allow it to cool.

4WD system indicator lights

• Blinks continuously when 4WD
system is disengaged (i.e. two
wheel drive) due to heat
protection mode.
• Blinks several times every minute when 4WD system requires
service. Please bring your vehicle to your local dealer for service.
2005 Escape (204)
Owners Guide (post-2002-fmt)
USA_English (fus)
Driving
201