Engine Data - Ford Escape 2005 Guia Del Propietario

Item Ford Part
Name or
equivalent
Windshield Motorcraft
washer fluid Premium
Windshield
Washer
Concentrate
1
DO NOT USE Motorcraft Specialty Orange Engine Coolant VC-2. Refer
to Adding engine coolant, in the this chapter.
2
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON and MERCON V are not interchangeable. DO NOT
mix MERCON and MERCON V. Refer to your scheduled maintenance
information to determine the correct service interval.
3
The Power Take-off (PTO) is lubricated for life with synthetic lube.
Lubricant levels are not to be checked or changed unless a leak is
suspected or repair required. Replace Power Take-off (PTO) lubricant
with specified synthetic lubricant anytime the unit is submerged in
water.
4
4X4 vehicles exposed for prolonged periods to temperatures less than
–40° F (-40° C) should change out the rear axle fluid to Motorcraft SAE
75W-140 Synthetic Rear Axle Lubricant, Ford part number
XY-75W140–QL meeting Ford specification WSL-M2C192–A.

ENGINE DATA

Engine
Cubic inches
Required fuel
Firing order
Ignition system
Spark plug gap
Compression ratio
2005 Escape (204)
Owners Guide (post-2002-fmt)
USA_English (fus)
Maintenance and Specifications
Ford Part
Number
ZC-32–A
2.3L I4 engine
140
87 octane
1-3-4-2
Coil on plug
0.049–0.053 inch
(1.25–1.35mm)
9.7:1
Ford
Specification
WSB-M8B16–A2
3.0L DOHC V6
Duratec engine
183
87 octane
1-4-2-5-3-6
Coil on plug
0.052–0.056 inch
(1.32–1.42mm)
10.0:1
281