Description Of Unit; Terminal Strip; Control And Display Unit - Bosch KTS 670 Instrucciones De Funcionamiento

�.5

Description of unit

KTS 670 is a modular, portable, location-independent
diagnostics, information and measurement system.
KTS 670 contains a computer unit, hard disk with
installed software, LCD display, lithium-ionic battery
and the measurement module with multimeter and
oscilloscope.
The "ESI[tronic] A, C and P" and "Diagnostics Software
Selection (DSA)" is pre-installed on the hard disk in the
factory.
For operation, either the stylus for the LCD
touchscreen, or a virtual keyboard is available for use.
A country-specific PS/2 keyboard (special accessories)
can also be connected.
Printouts of the data and the measurements can be
obtained via the USB interface from an external printer,
e.g. PDR 370 (special accessories). The printer can
be obtained from your Bosch technical equipment
provider. The LCD display is used as the display. In
addition, an external monitor can also be connected.
The KTS 670 and the accessories can be stored
protected in a case.
6
7
8
Fig. 1: Case layout KTS 670 and accessories
1 KTS 670
2 Case
3 OBD interchangeable adapter cable
4 Stylus
5 Y-connecting piece for the simultaneous connecting of KTS 670
and a DVD drive to the power pack.
6 Ground lead with terminal clip
7 Measuring cables for multimeter
8 Power pack with German mains connection lead
Robert Bosch GmbH
5
4
3
2
1
Product description | KTS ��� | 21
�.5.1

Terminal strip

4
1 2 3 5
CH2 CH1 DIAG
max. 60 V
Fig. 2: KTS 670 terminal strip
1 Measurement input CH2
2 Ground connection
3 Measurement inputs CH1(-) and CH1(+)
4 Connection control unit diagnostic cable (DIAG)
5 PC card slots for PCMCIA (PC card)
6 Network connection RJ-45 (LAN)
7 USB connections, e.g. USB mouse, PDR 370
8 Microphone connection
9 Headphone connection
10 Monitor connection
11 Power pack connection
12 PS/2 keyboard connection(connection for a PS/2 mouse is not
possible)
i
On the back of the KTS 670 there is a key to the
terminal strip.
�.5.2

Control and display unit

6
5
4
3
2
Fig. 3: KTS 670 Control/display unit
1 Carrying handle
2 LCD display with touchscreen
3 ON/OFF button
4 Windows Start menu button
5 LED on/off
6 LED external voltage supply
7 LED battery
8 LED hard disk access
KTS ��� | 21 | 21
7 8 9
6 10 11 12
PC-Cord LAN US8 15V DC
|
1 689 989 017 2008-07-04
en
8
7
1