Factory Setting - salmson LRE Serie Manual De Instalación Y Puesta En Servicio

No. Designation
5.7.6.0 SBM function
5.7.7.0

Factory setting

6.0.0.0 Error acknowl-
edgement
7.0.0.0 Access disable
Installation and operating instructions LRE-JRE
Type Symbol Values/explanations
Pressure value correction On
±
Setting for behaviour of signals
SBM run signal
SBM readiness signal
SBM mains On signal
±
OFF (default setting)
Settings are not changed by
confirming.
ON
Confirming will reset the set-
tings to factory settings.
Caution!
All manual settings will be lost.
±
For additional information, see
Section 11.3 "Acknowledging
errors" on page 89.
±
"Access disable" inactive
(changes possible)
(for further information, see
8.6.7 "Activating/deactivating
access disable" on page 74)
"Access disable" active (no
changes possible)
(for further information, see
8.6.7 "Activating/deactivating
access disable" on page 74)
English
Display conditions
Not displayed when
"access disable" is active
Not displayed when
"access disable" is active
Only displayed if an error is
present
80