GUTMANN VIENTO Instrucciones De Montaje página 18

EN
Installation
The device may only be connected by authorised specialists in compliance with all relevant
regulations of the power supply companies as well as the building regulations of the federal
states. Observe the corresponding instructions during installation! Damage to the device
must be reported immediately upon delivery. Damaged devices may be installed. Defective
parts must be replaced by original parts. Repairs may only be carried out by authorised
specialist personnel.
The device may not be operated with an external timer or an external telecontrol system.
Reliable and safe operation of the hob extractor hood is only guaranteed if it is connected
to the public power supply.
The hob may not be connected to stand-alone inverters which are used for autonomous
power supply, e.g. solar power supply. When the hob is switched on, voltage peaks can
otherwise cause a safety shutdown. The electronics can be damaged. The electrical safety
of the hob is only guaranteed if it is connected to a properly installed protective conductor
system. This basic safety requirement must be met.
Before the hob extractor hood leaves our factory, it is subjected to a detailed functional test
by our quality control department before being shipped.
The pictures, drawings and models shown in the operating instructions may differ from the
model supplied or may contain options which are not included in the scope of delivery.
Scope of delivery - Mounting accessories - Tools
A VIENTO hob with extractor fan
B PU foam tape
18
We reserve the right to make technical changes !