General Information; Purpose Of The Manual; Safety Information; General Guidelines - Elettro CF 3465 Manual De Uso

GENERAL INFORMATION

1
1.1

Purpose of the manual

This manual has been created to provide the necessary
information for the proper installation, use and
maintenance of the spotter.
Throughout the manual, the spotter may be referred
more generally as the machine.
The manufacturer reserves the right to make any
technical changes to this manual and to the machine
without prior notice.
1.2 Warranty
1.2.1 Warranty period
The manufacturer guarantees its products from
defects in workmanship and undertakes to replace any
parts found to be defective by the manufacture free of
charge to its customers.
1.2.2 Warranty period
The manufacturer guarantees its products for 24
months from the time of delivery stated on the
purchase document.
1.2.3 Warranty exclusions
The warranty does not cover components subject to
normal wear and tear, such as fuses.
1.3 Requesting technical support
Our customer support/after-sales service is available
for clarifications and for dispatch of spare parts.
Always specify the following:
• Customer name and identification data.
• Equipment identification data.
• Purchase document
In case of need, please contact:
NOTE
The Customer is required to always
purchase original accessories and spare
parts, or equivalents authorised in writing
by the manufacturer.
Translated copy of the original Italian text
1.4 Machine identification plate
(See attached image A1)
The manufacturer and machine identification data are
stamped on an identification plate.
The following data is displayed on the plate:
1. Equipment serial number.
2. Equipment code.
3. Year of manufacture.
4. Machine technical data.
5. Gun technical data.
WARNING
It is prohibited to tamper with,
engrave, alter or remove the machine
identification plate.
NOTE
In the event of accidental damage to the
identification plate, the incident should
be reported immediately to the technical
assistance.

SAFETY INFORMATION

2
2.1

General guidelines

In order to maintain the highest levels of device safety:
• operators and maintenance technicians must read
and understand the instructions for installation and
use of the device;
• all periodic maintenance operations described in
the Maintenance chapter must be carried out;
• the following safety instructions must be observed:
DANGER
„ Do not use the machine if you wear
a biomedical implant. For more
information, see the "Dangers from
magnetic fields" paragraph.
„ Never touch any parts subject to
overheating. For more information,
see the "Dangers of burns and fire"
paragraph.
„ Do not use the machine near explosive
and/or flammable materials.
„ Do not use the machine if the electrical
cables are damaged.
„ Do not use the machine on wet
surfaces.
EN-1
EN