Features; Machine Description; Intended Use; Improper Use - Elettro CF 3465 Manual De Uso

To limit exposure to the electromagnetic field:
• keep the welding cables as close together as
possible (winding them together, if possible) and
away from the user's body (do not position your
body within the path of the cables);
• keep the welding cables on the same side as the
hand holding the multifunction gun;
• weld the spot earth as close as possible to the area
on which the subsequent work is to be carried out.
2.5.3 Fume inhalation hazard
Analyse the work conditions and use suitable extraction
equipment if the welding operations generate fumes.
2.5.4 Burn hazard
The cables and electrodes on the machine can reach
very high temperatures during prolonged use.
DANGER
Remove the electrodes using pliers,
taking care to avoid any contact with hot
parts.
The high electrical current used by the machine can
cause metal objects located in its vicinity to overheat.
WARNING
When using the machine, do not wear
rings, watches or clothing with metal
parts or accessories.
2.5.5 Fire hazard
The surfaces on which the work is performed can reach
very high temperatures.
WARNING
Ensure that there are no flammable
materials in contact with or close to the
surfaces on which to work is to be done.
The electrodes on the machine can reach very high
temperatures during prolonged use.
WARNING
Store the electrodes in a suitable place
where they can cool down in total safety
(for example, on the ground).
Keep the surrounding area free from
flammable materials.
Translated copy of the original Italian text

FEATURES

3
3.1

Machine description

The spotter 3465 is a machine designed for
straightening by means of welding or localised heating.
The machine can be set manually and programs
can be saved for the most common work processes.
The transformer and the gun are provided with heat
protection.
3.2

Intended use

The machine must only be used in industrial
environments, closed environments, ventilated, dry
and free from dust, vapours and acid fumes. The
workplace must have adequate lighting. Modifications
of any kind are prohibited, as these invalidate the CE
certification and the warranty.
3.3

Improper use

The machine must not be used for purposes other than
those described in the "Intended use" section.
In particular it should not be used at home or on public
low voltage power lines.
INSTALLATION
4
On receiving the machine, check the integrity of the
packaging and report any irregularities found to
technical assistance.
4.1 Transport and handling of the
packaged machine
The packaging should be lifted and moved using
means of sufficient capacity.
4.2 Storage
Ensure that the area where the packaging will be stored
meets the following requirements:
• Temperature: +5 /+40 °C;
• Maximum relative humidity 60%.
Values beyond those indicated above can compromise
the proper functioning of the machine.
4.3 Installation
Installation must be performed by persons familiar
with the safety guidelines and in accordance with the
instructions provided in this manual.
The machine is designed for use in industrial
environments and is classified as a class A resistance
welder.
CAUTION
Class A welding machines are not intended
for use on public low voltage lines that
supply domestic environments. This can
cause radio frequency interference.
EN-3
EN