System Configuration With Using Al2-Gsm-Cab - Mitsubishi AL2 Serie Manual De Hardware

α
2 Simple Application Controllers
8.1.2

System Configuration with using AL2-GSM-CAB

Figure 8.2: System Configuration with AL2-GSM-CAB
α
2
Series
Table 8.1: System Configuration with AL2-GSM-CAB
Item
1
2
3
4
Figure 8.3: RS-232C Cross Cable Reference
(9-pin D-Sub female)
2
3
4
5
6
7
8
Note:
The 4 and 7 signals must be set to high-level on the personal computer side.
If these signals are not set, it will not communicate to
Using Dedicated Protocol
Remote Maintenance (Via Telephone Line)
Normal Modem
Remote Maintenance, E-Mail (Via GSM)
GSM
Modem
Sending SMS Message
AL2-GSM-CAB
RS-232C cross cable (See Figure 8.3)
RS-232C straight cable for the modem (See Figure 8.5)
RS-232C straight cable for the modem (specified by modem manufacturer)
Normal Modem
Normal Modem
(Supporting SMS message)
Using Cable
(9-pin D-Sub female)
3
2
6
5
4
8
7
α
2 series.
AL2-GSM-CAB 8
Personal computer
- Programming Software
(AL-PCS/WIN-E)
- Dedicated protocol
- E-Mail application
Cellular Phone
ENG-37
ENG