Installation And Assembly - edenox DNU Manual De Instrucciones

2.5 INSTALLATION AND ASSEMBLY.

The top extension should installed in the following order:
 remove the protective film from all metal surfaces; the top extension must be installed in a
well ventilated room; it can be used as a standalone device or as part of a row consisting of
other kitchen devices;
 the top extension should be connected to the electricity supply in compliance with applicable
regulations;
 install and connect the top extension in such a way that the elements which may be live
cannot be accessed without tools; the fuses of the power system of the top extension should
be designed for 10 A current;
 place the top extension on the worktop of one of our drop-in devices (the worktop should
have openings for fixing the top extension; if not, such openings should be made by the user);
secure the device with the bolts in the lower part of a leg; the height and the levelling of the
device should be adjusted before it is installed;
 install halogen lamps and glass shields in the halogen sockets (heating extension);
 connect the earth system of the device to the earth bar in such a way that it cannot be
disconnected inadvertently or unexpectedly; the power cable should contain a protective
conductor;
 to connect the top extension, use a cable of an appropriate length, so that it can hang freely
from the device (on no account may it be tight) when firmly and permanently attached to the
terminals of the connection block and the terminals of the power plug,
 the top extensions can be connected to the control box each of our drop-in devices is
equipped with by means of a 6-pin block.
2.6 CONNECTIONS (ELECTRICITY, GAS, AND WATER).
The power cable used with the device should have 3 cords, the diameters of which may not be
smaller than suggested in the manual.
Designed to be powered by 230V, 50-60Hz mains power, the device's power cable is equipped
with a PE protective conductor.
The electrical connection is in the lower part of one of the legs.
WARNING!!!
Prior to first use, it is necessary to remove the protective film and the protective substance
from the surface of the top extension by wiping it with a soft cloth moistened with soapy water.
5
edenox.com
ENGLISH