edenox DNU Manual De Instrucciones página 13

IMPORTANT!!!
DO NOT the clean the top extension with a water jet, since this may damage the electrical or
electronic components ensuring the proper operation of the device.
Before starting a cleaning or maintenance
procedure, disconnect the device from the
mains. After cleaning, leave the device open to
dry.
4.3 DISPOSAL OF THE DEVICE.
When its lifetime comes to an end, the device must be carried to an electronic and electronic
waste disposal facility.
This is indicated by a symbol on the product, in the instruction manual, and on the on the packaging.
In order to prepare the top extension to be disposed of, it is necessary to sort the elements of
the device according to the materials they are made of.
Depending on the material these element are made of (see the symbols on the components),
they can be recycled. Having electric waste and electronic equipment recycled means an active
contribution to the protection of the environment.
Contact local authorities to obtain more information on the nearest electrical waste collection
facility.
To protect the environment, deliver waste equipment to a suitable facility in compliance with
applicable regulations.
Make sure that the electrical equipment is
delivered to a facility in which it will be
disposed of properly.
Some of the materials used may be stored
temporarily, and some must be delivered
immediately to a suitable facility.
In each case the environmental protection
regulations must be observed.
8
edenox.com
When the device is being serviced, the power
cable and the plug should be in sight and on
hand so that the person working can easily
access them.
Before disposing of the device, check its
technical condition.
In particular, check the construction elements
which may cause leakage when disposed of.
Different parts of the device are disposed
differently, depending on their features (e.g.
metals, oils, lubricants, plastic, rubber, etc.).
ENGLISH