Maintenance - edenox DNU Manual De Instrucciones

4. MAINTENANCE

4.1 General safety requirements.
4.2 Cleaning and general maintenance.
4.3 Disposal of the device.
4.1 GENERAL SAFETY REQUIREMENTS.
All outer steel surfaces and all inner surfaces of the top extension need to be cleaned daily using
a small amount of detergent and lukewarm water. After being cleaned, the surfaces should be rinsed
with cold water and dried.
Do not clean acid-resistant steel surfaces with scrapers or wire cleansers, since they can
scratch the surfaces.
If the device is not going to be used for a long time, cover its surfaces, particularly the
operating surfaces, with a thin coat of Vaseline or a preservative that may come into contact with
food.
IMPORTANT!!!
DO NOT the clean the top extension with a water jet, since this may damage the electrical or electronic
components ensuring the proper operation of the device.
The device may be maintained only by trained
and specialized personnel using suitable
protective clothing (shoes, gloves, goggles,
etc), tools, instruments, and accessories.
4.2 CLEANING AND GENERAL MAINTENANCE.
All outer steel surfaces and all inner surfaces of the top extension need to be cleaned daily
using a small amount of detergent and lukewarm water. After cleaning, the surfaces must be rinsed
with cold water and dried. Never touch or clean the halogen filaments.
Do not clean acid-resistant steel surfaces with scrapers or wire cleansers, since they can
scratch the surfaces.
If the device is not going to be used for a long time, cover its surfaces, particularly the
operating surfaces, with a thin coat of Vaseline or a preservative that may come into contact with
food.
7
edenox.com
Before using or repairing the device, read the
instruction manual containing proper
procedures and safety information.
ENGLISH