Eschenbach uniADAPT Manual De Instrucciones página 8

Adjusting the monocular system
Anatomical adjustments are carried out by the eyeglass optician.
Anatomical adjustments
1. Adjust side length.
2. Saddle bridge a: adjust to correct fitting position t with the fixing
screws.
3. Inclination (Frame angle): adjust to suit head position of user.
Fitting the monocular
The monocular can be fitted to the right or left eyepiece holder
{
Depending on the length position of the monocular, the fitting ring
i can be attached behind or in front of the eyepiece holder y by
screwing it onto the thread of the monocular o.
1. Insert monocular.
2. Using the fitting ring i or the eyepiece cup holder, u screw the
monocular to the eyepiece holder y.
3. Attach blinker r to other eyepiece holder.
Setting the pupil distance (PD)
1. Adjust the near / far PD using the scale on the eye-side e of the
carrier frame d.
Position the apex of the monocular lens as closely as possible to
{
the eye to ensure the maximum possible viewing field for the user.
2. Once the PD has been set, lock the eyepiece holder y with the
clips w.
- 8 -
y.