PULOX PO-200 Manual De Instrucciones página 22

Hemoglobin Saturation.
2.1 Classification
Class II b, (MDD93/42/EEC IX Rule 10)
2.2 Features
A.
Operation of the product is simple and convenient.
B. The product is small in volume, light in weight (total weight is
about 50 g including batteries) and convenient in carrying.
C. Power consumption of the product is low and the two
originally equipped AAA batteries can be operated
continuously for 20 hours.
D. The product will enter standby mode when no signal is in the
product within 5 seconds.
E.
Display direction can be changed automatically,easy to view.
2.3 Major Applications and Scope of Application
The Pulse Oximeter can be used in measuring the pulse oxygen
saturation and pulse rate through finger. The product is suitable for
being used in family, hospital, oxygen bar, community healthcare,
physical care in sports (It can be used before or after doing sports and
it is not recommended to use the device during the process of having
sport) and etc.
The product is not suitable for use in continuous supervision
for patients.
The problem of overrating would emerge when the patient is
suffering from toxicosis which caused by carbon monoxide, the
device is not recommended to be used under this circumstance.
2.4 Environment Requirements
Storage Environment
a.
b.
c.
Operating Environment
a.
b.
c.
Temperature : -40°C ~+60°C
Relative humidity : ≤95%
Atmospheric pressure : 500hPa~1060hPa
Temperature: 10°C ~40°C
Relative Humidity : ≤75%
Atmospheric pressure: 700hPa~1060hPa
EN