Operation - SATA SATAjet 100 B F RP Instrucciones De Servicio

Ocultar thumbs Ver también para SATAjet 100 B F RP:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 147
Operating Instructions SATAjet 100 B F (RP / HVLP), B P
Weight | Version
Weight (without material) plastic
flow cup 600 ml
Weight (without material)
RPS cup 600 ml
Weight (without material)
aluminium flow cup 1000 ml

8. Operation

Risk of injury from bursting compressed air hose
If an unsuitable compressed air hose is use, it can be damaged by too
much pressure and explode.
→ Only use solvent-resistant, antistatic and technically flawless hose
for compressed air with permanent pressure resistance of min. 10 bar,
bleeder resistance of < 1 MOhm and min. inner diameter of 9 mm
(# 53090).
Damage from dirty compressed air
Using soiled compressed air can cause malfunctions
.
→ Use clean compressed air. For example with SATA filter 100
(# 148247) outside the spray booth or SATA filter 484 (# 92320) inside
the spray booth.
Before using the spray gun, heed / check the following points to warrant
safe working:
■ Screws [2-1], [2-2], [2-3], [2-4] and [2-5] fit firmly. Tighten screws if
necessary.
■ Fluid tip [2-2] tightened with a torque of 14 Nm [7-5].
■ Locking screw [10-1] tightened.
■ Technically clean compressed air is being used.
RP/
HVLP
601 g 612 g
478 g 489 g
610 g 621 g
Warning!
Attention!
Polyester RP/
HVLP
21.2
oz.
16.9
oz.
21.5
oz.
EN
Polyester
21.6 oz.
17.2 oz.
21.9 oz.
133

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Satajet 100 b f hvlp satajet 100 b p

Tabla de contenido