Safety Considerations - Airwell FAV012 Manual De Instrucciones

Safety Considerations

Items with this warning sign concerning the product's safety and the personal
security must be performed strictly.
Items with this forbidding sign refer to absolutely forbidden behaviors. If not, they
may cause machine damage or endanger operator's personal safety.
Clean the filter regularly.
Cooling or heating performance will be
degraded if the filter is blocked, resulting
in large power consumption, failure, and
water dripping
at freezing.
Avoid cold wind from blowing out.
During heating running, the fan of indoor
units will not rotate immediately as to
prevent cold wind from blowing out.
Regulating Wind Direction:
It is recommended not to make the wind
deflector downwards for a long time to avoid
condensation at air outlet port during
refrigerating or dehumidifying.
Water dropping might appear at the air
outlet port in refrigerating or dehumidifying
mode.
The machine operation must be controlled
by the control.
wait for a moment
Don't touch the outlet while the flap is
moving. Don't put anything in the grid in
case danger may occur.
Changing Wind Speeds:
In the state of refrigerating, with automatic
blowing mode, the wind speed automatically
decreases when the room temperature
approaches the setting.
In the state of heating, when the room
temperature reaches the setting temperature
the compressor stops working and the fan
turns to low wind or stops. Wind speed
changes automatically in the dehumidifying
mode.
Defrosting:
During heating running, the air conditioner
would defrost automatically if there is frost
on heat exchanger of outdoor units.
Do not rotate fans of both indoor units and
outdoor units during defrosting.
After finishing defrosting, the air conditioner
will resume running automatically.
Hints:
As air conditioners absorb heat from the
environment and release it to the room,
heating effects will be influenced by the
temperature in and out of the room.
8