Airwell FAV012 Manual De Instrucciones página 20

Operation instruction
Timing setting
OFF timing: when a set time has elapsed, the unit stops running.
ON timing: when a set time has elapsed, the unit starts.
MODE FAN
OPERATION
HIGH
COOL
ROOM TEMP.
TIMER
ON
parts of wired controller explanation :
1.The unit starts or stops at the setting time. Meanwhile, it displays the timing time.
2."ON Timing, OFF timing and circulation"means that the unit is on and off at the setting time
everyday.
Note
The shorter setting time will be carried out firstly.
If the ON timing and OFF timing are the same, the setting is invalid.
Even in timing condition, you may start or close the unit through pressing "ON/OFF" switch.
MODE FAN SWING
TEMP
HEALTH
CLOCK TIME
TIMER SET RECOVERY
CHECK FILTER
RESET
ON/OFF
1 3 2
1.Press "TIME" switch.
The display changes with the following
sequence:
ON OFF
2.Set up "TIMER"
When timing ON or timing OFF flickers,
press " " or "
Press" "or "
The setting time increases ten minutes each
time you press "
The setting time decreases ten minutes
each time you press "
When setting timing ON and timing OFF at
the same time, press "timing" switch to
change the setting item.
3.Time setting is achieved.
Press"SET"switch.
Cancel timing
If you want to change the timing mode to
normal operation, press "timing" until there
is no timing display. When the timing is
invalid, the mode is in normal operation.
12
Press "ON/OFF" switch firstly,
and set up operation mode.
Please regulate the clock in
advance before using the
timing function.
ON
ON
CYCLE
OFF
OFF
" to regulate the time
" set up ON/OFF time.
" switch.
" switch.
no display