Delivery Condition - Chauvin Arnoux XCP4ST1 Manual De Instrucciones

Thank you for purchasing this XCP4ST1 conductivity cell with integrated temperature measurement.
For best results from your instrument:
„ read these operating instructions carefully,
„ comply with the precautions for use.
This cell is designed to be used only with the C.A 10141 conductivity meter.
The CE marking indicates conformity with European directives, in particular LVD and EMC.
The rubbish bin with a line through it indicates that, in the European Union, the product must undergo selective disposal
in compliance with Directive WEEE 2012/19/EU. This equipment must not be treated as household waste.
The conductivity cell is delivered in a cardboard box with a shim.
For the accessories and spares, consult our web site:
www.chauvin-arnoux.com
The cell is used to measure the electrolytic conductivity of solutions.
„ Connect the cell to the measuring instrument.
„ Calibrate the cell with a standard solution, then rinse it with deionized water.
„ Immerse the end of the cell in the solution to be measured, making sure that the sensitive part is immersed.
„ Wait for the measurement to stabilize.
„ Rinse the cell in deionized water between measurements.
To avoid damaging the cell, never make measurements in the following solutions:
„ hydrofluoric acid solution,
„ acid and alkaline solutions at high concentrations (> 2 mol/L)
„ clogging solution (resin, paint, etc.)
ENGLISH

DELIVERY CONDITION

USE
6