Lincoln Electric SAF-RPO PRESTOMIG 185MP Manual De Instrucciones página 8

18. Power Lead with Plug (2m): Power lead with plug is
a standard equipment. Connect the power lead with
plug to the main supply before turning power on.
23
21
22
Figure 4.
19. Work Lead.
20. Wire Drive (for GMAW, FCAW-SS process): 2-Roll
wire drive.
21. Welding Wire (for GMAW / FCAW-SS).
22. Spooled Wire (for GMAW / FCAW-SS): The machine
does not include a spooled wire.
Table 1.
English
20
24
25
19
23. Wire Spool Support: Maximum 5kg spools. Accepts
plastic, steel and fiber spools onto 51mm spindle.
24. Shield of Changing Polarity.
25. Terminal Block of Changing Polarity (for GMAW /
FCAW-SS process): This terminal block enables to
set the welding polarity (+ ; -), which will be given at
the welding holder.
Positive (+) polarity is set at the factory.
Before welding check the polarity for using electrodes
and wires.
If the welding polarity has to be changed, user should:

Switch off the machine.

Determine the wire polarity for the wire to be used.
Consult the electrode data for this information.

Take off the terminal block's shield [24].

The tip of the wire on the terminal block [25] and
work lead fix as is shown in the Table 1 or the
Table 2.

Put on the terminal block's shield.
The machine must be used with the door completely
closed during welding.
Not use handle to move the machine during work.
5
WARNING
WARNING
WARNING
WARNING
English