Mondolfo Ferro AQUILA ALLIANCE Manual De Uso página 105

- Maintaining the pressure of the bead breaker disc on
the tyre (Fig. 22), create enough space to allow the
demount tool to be rocked.
- Using control
(Fig. 22).
- It is important to rotate the turntable slightly to
facilitate engagement of the bead.
- For easier bead coupling, it might be very helpful to
use the bead breaker disc on the lower part of the
tyre using control
Demounting the top bead
- Check that the tool has engaged with the tyre bead.
- Operate control
subsequent demounting (Fig. 22a) (this must be
done with the wheel at a standstill and not rotating).
- Make sure that the tyre has not beaded in on the
operator's side. If necessary, use a clamp and/or a
bed presser (Fig.22b).
- Now, and only now, operate the pedal
until the bead is completely demounted Fig.22c.
- Here again, it might be helpful to use the bead breaker
disc on the underside of the tyre.
AQUILA ALLIANCE User Manual
23 Fig.21, rock the demount tool
3 Fig.10a.
23 Fig.21 to prepare for the
22b
15 Fig.10
A
B
22
C
22a
22c
105