During Use; Transport, Storage And Handling; Conditions For Transporting The Machine - Mondolfo Ferro AQUILA ALLIANCE Manual De Uso

1.7. DURING USE

In the event you hear any strange noise or feel unusual vibration, if a component or system is not
operating properly, or if there is anything unusual at all, stop using the machine immediately.
• Identify the cause and take any necessary remedial action.
• Contact your supervisor if necessary.
Never allow any bystander to be within 20 feet of the machine during operation.
To stop the machine in an emergency:
• disconnect the power supply plug;
• cut off the compressed air supply network by disconnecting the shut-off valve (snap coupling).

2. TRANSPORT, STORAGE AND HANDLING

Conditions for transporting the machine

The tyre changer must be transported in its original packing and stowed in the position shown
on the packing itself.
- Packing dimensions:
• width ............................................................................................................................... 1543 mm
• depth .............................................................................................................................. 1140 mm
• height .............................................................................................................................. 1900 mm
- Weight of wooden packing: ....................................................................................................380 kg
Machine storage and shipping specifications
Temperature: -25° - +55°C.
Do not stack other goods on top of the packing or damage may result.
Handling
To move the packing, insert the tines of a fork-lift truck into the slots on the base of the pack-
ing itself (pallet) (Fig.3).
Before moving the machine, refer to the HOISTING/
HANDLING section.
AQUILA ALLIANCE User Manual
NOTICE
3
89