Mondolfo Ferro AQUILA ALLIANCE Manual De Uso página 114

provided by the tyre manufacturer, as stated on the sidewall of the tyre.
4. Never place your head or any part of your body over a tyre during the inflation process
or when attempting to seat beads.
This machine is not intended to be a restraining device for exploding tyres, tubes or rims.
5. Always stand back from the tyre changer when inflating, never lean over.
During this operation, noise levels assessed at 85 dB(A) may occur.
Wear hearing protection devices.
EXPLOSION HAZARD. An exploding tyre and rim may be propelled upward and
outward with enough force to cause serious injury or death.
Do not mount any tyre unless the tyre size (molded into the sidewall) matches the rim
size (stamped into the rim) exactly or if the rim or tyre are defective or damaged.
This tyre changer is not a safety device and will not restrain exploding tyres and rims.
Keep the area clear of bystanders.
6.9.b. INFLATING TYRES
1. Make sure the wheel on which the tyre is fitted is
securely clamped on the turntable by the centring
handle (Fig. 28).
2. Make sure the tool head, upper and lower
bead breaking units, and if possible are in the
rest position.
3. Remove the valve stem core if not already done
(Fig. 28a).
4. Connect the air hose Doyfe inflator chuck to the
valve stem (Fig. 28b).
114
WARNING
DANGER
28a
AQUILA ALLIANCE User Manual
28
28b