POSITIONING THE STOVE
For the correct operation of the product, we recommend positioning it on a perfectly at surface. Use a spirit level to check this.
NOTES FOR CORRECT OPERATION
For the correct operation of the pellet stove, the following
indications must be respected:
Both during the functioning and when the stove is not in use,
all the machine doors (pellet hopper, re door, ash drawer) must
always remain closed. The machine doors can only be opened
for the time required to load the pellet and for maintenance.
Failure to comply with the above during operation will cause the
display to show the following:
"CLOSE HOPPER DOOR"
This message indicates that you have 60 seconds to close the
hatch/door and pellet lid.
After the 60 seconds, during the ignition phase the stove will
go to "DEPR ALARM" mode, while during normal operation the
stove will go to "COOLING STAND BY" mode and then re-start
automatically when the correct conditions are present (stove
cold, etc.).
FUSE
If the stove is not powered, check the condition of
the fuse in the drawer between the stove switch
and the power cord.
46
Fire door
ENGLISH
Pellet hopper lid