Details On Burn Pot - Dal Zotto Leyla Elite Manual Del Usuario

THE SEALS OF THE PELLET HOPPER, BURN POT AND THE FIRE DOOR ENSURE THE CORRECT OPERATION OF THE
STOVE.
THEY MUST BE REGULARLY CHECKED BY THE USER AND IF THEY ARE FOUND TO BE WORN OR DAMAGED THEY MUST
BE REPLACED IMMEDIATELY.
THESE OPERATIONS MUST BE PERFORMED BY A QUALIFIED TECHNICIAN.
A CLEAN BURN POT GUARANTEES CORRECT OPERATION!
BY MAKING SURE THE BURN POT AND ITS HOLES ARE ALWAYS CLEAN FROM
ANY COMBUSTION RESIDUE, EXCELLENT COMBUSTION BY THE GENERATOR
IS GUARANTEED OVER TIME, PREVENTING ANY MALFUNCTIONS THAT MAY
REQUIRE THE INTERVENTION OF A TECHNICIAN.
THE "EASY SETUP" FUNCTION CAN BE USED TO ADAPT COMBUSTION ON THE
BASIS OF THE NEEDS DESCRIBED.

DETAILS ON BURN POT

The burn pot consists of several parts:
The burn pot (A) where combustion takes place physically, a pellet slide assembly (B) and the partition (C).
A
To clean and remove the burn pot, it is necessary to remove the pellet slide assembly (B) by lifting it.
To put it back in place, perform the same operation in reverse order.
After repositioning it, make sure:
• that any dirt in the burn pot and in the partition (C) has been eliminated.
• that the pellet slide assembly rests on the burn pot correctly, and not on another surface of the combustion chamber.
• that the slide assembly has been pushed towards the wall (D) (to the right).
ENGLISH
B
63