Technical Data; Safety Devices; Safety And Information Signs - Angelo Po 191PI2E Manual De Uso

TECHNICAL DATA

See tables and "Connection chart" at the back of
the manual.

SAFETY DEVICES

Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
A)Safety thermostat: cuts off the electricity supply
in case of overheating.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.

SAFETY AND INFORMATION SIGNS

The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data
B)General hazard: read the manual carefully before
carrying out any procedure.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: all relevant regulations must be
complied with. "Install in compliance with the rele-
vant regulations and use in well ventilated premises
only".
E)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of fail-
ure to comply with the installation and commission-
ing instructions".
F) Burn hazard: watch out for hot surfaces.
G)CE marking: indicates that the appliance is compli-
ant with the relevant norms.
H)Arm crushing hazard: never insert hands in the
pan while in use.
L) Scald hazard: take care, very hot steam.
M)General hazard: dry operation is forbidden.
N)General warning: describes the specifications of
the jacket.
D
E
C B
A
G
P)General warning: describes the precautions to be
adopted during use.
Q)WEEE symbol: indicates that the appliance is sub-
ject to specific waste disposal regulations.
- 5 -
A
IDM-39616400300.tif
M L N
Q P
IDM-39616400400.tif
F
IT
GB
H
DE
FR
ES
English