To Adjust The Seat; To Apply And Release The Parking Brake; To Adjust Height Of The Steering Wheel; To Engage And Disengage The Drive System - Husqvarna R 419TsX AWD Manual De Usuario

Ocultar thumbs Ver también para R 419TsX AWD:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The engine runs on gasoline with a minimum octane
rating of 91 RON (87 AKI), not mixed with oil. We
recommend biodegradable alkylate gasoline. Do not use
gasoline that contains more than 10% ethanol.
Do a check of the fuel level before each use and
refuel if it is necessary.
Do not fully fill the fuel tank. Keep a space of a
minimum 2.5 cm.

To adjust the seat

WARNING: Do not adjust the seat during
operation of the product.
1. To adjust the seat forward and rearward, put your
feet on the footrest plates.
2. Push the lever below the front edge of the seat, to
the side.
3. Move the seat to the position that is correct for you.
4. To adjust the seat springs, move the 2 rubber stops
below the seat as given in the illustration. Put the 2
rubber stops in the front, middle or rear holes below
the seat.

To adjust height of the steering wheel

WARNING: Do not adjust the height of the
steering wheel during operation of the
product.
16
1. Turn the knob counterclockwise to loosen.
2. Adjust the height of the steering wheel.
3. Turn the knob clockwise to tighten.
CAUTION: Make sure that the long end of
the knob points up.

To apply and release the parking brake

1. Push the parking brake pedal down (A).
2. Push and hold the lock button (B).
A
3. Keep the lock button pushed and release the parking
brake pedal.
4. To release the parking brake, push the parking brake
pedal.
To engage and disengage the drive
system
To move the product with the engine off, the drive
system must be disengaged. Pull out the drive system
lever fully to disengage the drive on the axle. Push the
B
880 - 006 - 09.09.2020

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

R 420tsx awd

Tabla de contenido