Hydraulic System Overview; Forward And Rearward Pedals; Lift Lever For The Hydraulic Lift Of The Cutting Deck - Husqvarna R 419TsX AWD Manual De Usuario

last digit of the hour meter for the operation period,
shows tenth of an hour (6 minutes).
The time with ignition on but engine off, is not registered.
Note: The total hour meter (A) only shows full hours.
The engine must to run for a minimum of one hour for
you to see it on the total hour meter (A).
Note: A operation period is the time the engine been
turned on during 1 day. A new operation period starts if
the engine is turned off for a minimum of 6 h.

Hydraulic system overview

1. Hydraulic oil cooler
2. Lift lever
3. Oil filter
4. Cylinder
5. Central steering unit

Forward and rearward pedals

The speed is gradually adjusted with 2 pedals. The left
pedal (A) is used to move forward, and the right pedal
6
1
2
3
A
4
(B) is used to move rearward. The product brakes when
the pedals are released.
Lift lever for the hydraulic lift of the
cutting deck
The lift lever controls the hydraulic lift. Use the hydraulic
lift to lift the cutting deck to the transport position and to
lower the cutting deck to the mow position. The
5
A
B
880 - 006 - 09.09.2020
B