N Activate/deactivate the receiver collar
A magnet located in the remote control is used to either switch on/off the receiver collar.
- Activate: approach the red area where the magnet is located inside the remote control until coming in
contact on red indicator located on the receiver collar for 1 second (ref. Diagram 5), the indicator light
will flash in green indicating that CANICOM is ready .
REMOTE CONTROL
- Deactivate: approach the red area where the magnet is located inside the remote control until coming
in contact on red indicator located on the receiver collar for 1 second (ref. Diagram 5), the indicator light
will flash from green to red and then off: the receiver is off .
To increase the battery life of the receiver collar, we recommend you deactivate the unit if you are no
longer using your CANICOM 200 for a long period.
N Coding of the remote control and receiver collar
Each remote control has its individual radio operator code. The coding of the remote control with the
receiver collar enables to couple your remote control with the receiver provided.
Gb - 23
Diagram 5
Approach until coming in contact those 2 areas
during 1 second
RECEIVER COLLAR